Idea Into Product

The proposed motor is a magnetic power device, which uses energy of permanent magnets with interactions with each other. This device is technologically simple for manufacturing, if manufacturing (power of permanent magnets operate efficiently on a small distance) can be obtained from the device, which is the shaft power will give a large torque at the high revs.

Magnetic motor contains a shell, which has an opportunity to interact through the magnetic forces of permanent magnets with the opportunity of rotating parts, and with the fact that they are strictly parallel to each other and establish on the case of the four axes.

On fig.1 schematically shows the proposed engine, the overall appearance in fig.2
The proposed engine contains block 1, which are rigidly parallel axis 2, 3, 4 and 5, in which the possibility of rotation of the drums are respectively 6, 7, 8 and 9. On the drums 6 and 7 tight tape 10 and the drums 8 and 9, the same tight band 11. Ribbons 10 and 11 may be magnetized so that they attract or repel each other. Drums 7 and 9 set close, so that the straps 10 and 11 are rolled upon each other, and then diverge at an angle “a”, equal to 1-30 *.

The proposed engine runs through the magnetic interaction between tapes 10 and 11, while in the case of gravity belts 10 and 11 to one another drum 7 rotates clockwise and the drum 9 – anti-clockwise, and when the tape 10 and 11 repel each other. These rotations directed in the opposite direction. The torque is removed from any of the reels 6, 7, 8 and 9.

Drawing:

Contact: Mr. Izmalkov

e-mail: geizmalkov@yandex.ru